Easy change
LS-R912
The large frame body of the LS-R912 developed with the basic specification of the LS-R900 offers a function to switch between 2 test pressures (Input A and Input B). The combination of the 2 pressures (Input A and Input B) can be selected from the Ratings Table. Up to two EP regulators can be configured on the leak tester. This allows you to increase both productivity and efficiency at the cost of a single device.
Measuring screen
With the ability to change the device language from English to Japanese and Chinese, you will never again have to worry about misunderstanding certain functions and features.
Input selection screens
This allows the user to select the two different entries on the fly at the click of a button, making it easy to modify and display the required data when needed.
Load-holding screens
The LS-910 makes your life easier by directly showing you whether parts to be tested are pressurized or not. This function remains active regardless of whether the shut-off valve is open or closed.
Product features
Standard features
Intelligent pneumatic circuit II
Load retention
Calibration
Leakage limits
Drift compensation
Self-diagnosis
Exhaust interference prevention
Sensor protection (exhaust air blowing)
Sensor protection (external exhaust valve)
Group
LAN port
Checking valve performance
Pneumatics Checking the sensitivity of the DPS
Valve equipment
Weight savings
High flow capacity
It is used to detect the location of the leak.
Equivalent internal volume measurement
K (Ve) Range calibration and compensation of differential pressure sensor
Range calibration and pressure sensor compensation test
Two-level limit setting (DET HH, DET Hi, DET Lo, DET LL)
Noise reduction
To master
the average
fixed mobile
Valve performance
Pneumatics DPS sensitivity
Shut-off valve open / closed
Sensor compensation
CPU performance
Control of the exhaust timing of the pneumatic circuit units
Cleaning of the pneumatic circuit at the end of each test cycle
A separate external exhaust valve unit (G3-M) is required
Sincronizar el inicio y el final (escape) de la estaciónseleccionada
FTP server (In preparation)
General specifications
Differenial pressure
Minimum reading
Reading accuracy
Sensor range
Test pressure
0,1 Pa
± 2,5% of the reading ± 1 Pa
± 2,5% of the reading ± 1 Pa para un rango superior a 50 Pa
± 2 Pa for a range of 0-50 Pa
± 1500 Pa
5 mPa
Presión de sensor
Test accuracy
Leakage rate
Equivalent internal volume
mPa, kPa (PSI, kg / cm2, bar, mbar, mmHg, cmHg, inHg) * 1
Pa, kPa, mL / s, mL / min, L / min
(mmH20, inH20, mmHg, in3 / min, in3 / d) * 1
mL, L (in3, ft3) * 1
Number os stations
Up to 8 stations
Number of channels
32 channels (0 ~ 31)
